The FC-41 Plus Feeder Cube® is a Single controller, housed in a NEMA-12 oil resistant enclosure. Input voltage is 120 VAC, 50/60 Hz. Fused for 15 amps.

Unit of Measure

Rodix P/N

N/A 121-000-0881

Model Number

N/A FC-41 Plus

Brands

N/A Rodix

Applications

N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

N/A 1 (Single)

AC Input Voltage

N/A 120 VAC

Mains Frequency

N/A 50/60 Hz

Output Voltage

N/A 0 to 120 VAC

Current Rating

N/A 15A

Control Interface

N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Auxiliary Output

N/A Not Available

Remote Enable ON / OFF

N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

N/A Selectable: On or Off

Soft Start

N/A Adjustable, 0-6 seconds

Enclosure Rating

N/A NEMA-12

Product Certifications

N/A UL/cUL Certified

UL File Number

N/A UL File E183233

Country of Origin

N/A USA

Spare Parts

N/A , Control Board for 40+ Series controllers, 120 VAC ($60.00)
, Toggle Switch for Oil Resistant (OR) Controls ($8.00)
, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00)
, Terminal strip, 7 position, 20 Amp ($6.00)
, Terminal marking strip, 7 position, 20 Amp ($3.00)
, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00)
, Fuse, 15 Amp ($1.00)
, Triac, Power, 40A ($15.00)
, Knob for Oil Resistant Controls ($3.00)
, Main control potentiometer used on Oil Resistant (OR) controls ($15.00)

Accessories

N/A , Line Cord Installation, Single 120 VAC (1 input, 1 output) ($40.00)
, Line Cord Kit, 120 VAC (1 Male, 1 Female, cord grips) ($35.00)
, Access Hole, 7/8" diameter ($8.00)
, Line Cord Install, Single 120 VAC (1 input) ($25.00)
, Access Hole and Cord Grip, 7/8" diameter ($8.00)
, Control Kit, 5 turn Potentiometer, with Knob ($54.00)