The CE-44 Plus Feeder Cube® is a single vibratory feeder controller that carries the CE mark.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers.
It is housed in an Open Frame configuration intended for installation within a control panel, with a remotely mounted Main Control Potetiometer & Power Switch (sold seperately). Declaration of Incorporation provided.
Input voltage is 120 VAC, 50/60 Hz. It is fused for 15 amps. If required, a CE power line filter is sold seperately for use on the Rodix controller only
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers.
It is housed in an Open Frame configuration intended for installation within a control panel, with a remotely mounted Main Control Potetiometer & Power Switch (sold seperately). Declaration of Incorporation provided.
Input voltage is 120 VAC, 50/60 Hz. It is fused for 15 amps. If required, a CE power line filter is sold seperately for use on the Rodix controller only
Unit of Measure
Rodix P/N |
N/A 121-500-0704 |
Model Number |
N/A CE-44 Plus |
Brands |
N/A Rodix |
Applications |
N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers |
Number of Controls |
N/A 1 (Single) |
AC Input Voltage |
N/A 120 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 120 VAC |
Current Rating |
N/A 15A |
Enclosure Rating |
N/A None (Open Frame) |
Product Certifications |
N/A CE Mark |
Country of Origin |
N/A USA |
Control Interface |
N/A Analog: Potentiometer, DIP Switch |
Output Pulse Modes |
N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps |
Auxiliary Output |
N/A Not Available |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable via Trim Pot on Control Board |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Soft Start |
N/A Adjustable, 0-6 seconds |
Spare Parts |
N/A
104-000-0080, Switch for CE Mark Controls ($28.00) 106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00) 106-000-0018, Fuse, 15 Amp ($1.00) 115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00) 123-000-0145, Control Cable for Main Potentiometer, 4 (ft) long ($5.00) 123-000-0293, Control Board for CE Plus Controls in the 40+ Series, 120 VAC ($75.00) |
Accessories |
N/A
120-000-0012, Line Filter for CE Plus Series Controls ($45.00) 123-000-0177, Control Kit, for CE Plus Series Open Frame Controls ($15.00) |