Request Information
The CE-44-240 Plus Feeder Cube® is a single vibratory feeder controller that carries the CE mark.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers.
It is housed in an Open Frame configuration intended for installation within a control panel, with a remotely mounted Main Control Potetiometer & Power Switch (sold seperately). Declaration of Incorporation provided.
Input voltage is 240 VAC, 50/60 Hz. It is fused for 8 amps. If required, a CE power line filter is sold seperately for use on the Rodix controller only
Unit of Measure

Rodix P/N

 N/A 121-500-0705

Model Number

 N/A CE-44-240 Plus

Brands

 N/A Rodix

Applications

 N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

 N/A 1 (Single)

AC Input Voltage

 N/A 240 VAC

Mains Frequency

 N/A 50/60 Hz

Output Voltage

 N/A 0 to 240 VAC

Current Rating

 N/A 8A

Enclosure Rating

 N/A None (Open Frame)

Product Certifications

 N/A CE Mark

Country of Origin

 N/A USA

Control Interface

 N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

 N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Auxiliary Output

 N/A Not Available

Remote Enable ON / OFF

 N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

 N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

 N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

 N/A Selectable: On or Off

Soft Start

 N/A Adjustable, 0-6 seconds

Spare Parts

 N/A , Switch for CE Mark Controls ($28.00)
, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00)
, Triac, Power, 40A, for FC Series Controls ($15.00)
, Control Cable for Main Potentiometer, 4 (ft) long ($5.00)
, Control Board for CE Plus Controls in the 40+ Series, 240 VAC ($90.00)

Accessories

 N/A , Line Filter for CE Plus Series Controls ($45.00)
, Control Kit, for CE Plus Series Open Frame Controls ($15.00)