Request Information
The CE-41 Plus Feeder Cube® is a single vibratory feeder controller that carries the CE mark.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers.
It is housed in a NEMA-12 oil resistant enclosure. Declaration of Incorporation provided.
Input voltage is 120 VAC, 50/60 Hz. It is fused for 15 amps. Input & Output Line Cords are sold seperately.
Unit of Measure

Rodix P/N

 N/A 121-500-0746

Model Number

 N/A CE-41 Plus

Brands

 N/A Rodix

Applications

 N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

 N/A 1 (Single)

AC Input Voltage

 N/A 120 VAC

Mains Frequency

 N/A 50/60 Hz

Output Voltage

 N/A 0 to 120 VAC

Current Rating

 N/A 15A

Enclosure Rating

 N/A NEMA-12

Product Certifications

 N/A CE Mark

Country of Origin

 N/A USA

Control Interface

 N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

 N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Auxiliary Output

 N/A Not Available

Remote Enable ON / OFF

 N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

 N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

 N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

 N/A Selectable: On or Off

Soft Start

 N/A Adjustable, 0-6 seconds

Spare Parts

 N/A , Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00)
, Switch for CE Mark Controls ($28.00)
, Terminal Block for CE Mark controls ($1.50)
, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00)
, Fuse, 15 Amp ($1.00)
, Triac, Power, 40A, for FC Series Controls ($15.00)
, Knob for CE Mark Controllers ($10.00)
, Main Control Potentiometer for CE Mark Controls ($18.00)
, Control Board for CE Plus Controls in the 40+ Series, 120 VAC ($75.00)