The CE-49 Plus Feeder Cube® is a dual output vibratory feeder controller that carries the CE mark.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers where seperate outputs are required for (2) seperate vibratory feeders.
It is housed in a NEMA-12 oil resistant enclosure. Declaration of Incorporation provided.
Input voltage is 240 VAC, 50/60 Hz. Units A and B are boths fused for 8 amps. Input & Output Line Cords are sold seperately.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers where seperate outputs are required for (2) seperate vibratory feeders.
It is housed in a NEMA-12 oil resistant enclosure. Declaration of Incorporation provided.
Input voltage is 240 VAC, 50/60 Hz. Units A and B are boths fused for 8 amps. Input & Output Line Cords are sold seperately.
Unit of Measure
Rodix P/N |
N/A 121-500-0752 |
Model Number |
N/A CE-49 Plus |
Brands |
N/A Rodix |
Applications |
N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers |
Number of Controls |
N/A 2 (Dual) |
AC Input Voltage |
N/A 240 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 240 VAC |
Current Rating |
N/A Unit A - 8 A Unit B - 8 A |
Enclosure Rating |
N/A NEMA-12 |
Product Certifications |
N/A CE Mark |
Country of Origin |
N/A USA |
Control Interface |
N/A Analog: Potentiometer, DIP Switch |
Output Pulse Modes |
N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps |
Auxiliary Output |
N/A Not Available |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable via Trim Pot on Control Board |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Soft Start |
N/A Adjustable, 0-6 seconds |
Spare Parts |
N/A
104-000-0026, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00) 104-000-0080, Switch for CE Mark Controls ($28.00) 106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00) 106-000-0020, Fuse, 8 Amp ($1.00) 115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00) 122-000-0010, Knob for CE Mark Controllers ($10.00) 123-000-0147, Main control potentiometer used on Oil Resistant (OR) controls ($15.00) 123-000-0294, Control Board for CE Plus Controls in the 40+ Series, 240 VAC ($90.00) 264-301, Terminal End Block for CE marked controls ($1.75) 264-321, Terminal Block for CE marked controls, 2 conductor ($1.75) 264-351, Terminal Block for CE marked controls, 4 conductor ($2.50) |