Request Information
The CE-47 Plus Feeder Cube® is a single vibratory feeder controller that carries the CE mark.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers.
It is housed in an Open Frame configuration intended for door mounted installation within a control panel. The Main Control Potetiometer & Power Switch included. Declaration of Incorporation provided.
Input voltage is 120 VAC, 50/60 Hz. It is fused for 15 amps. If required, a CE power line filter is sold seperately for use on the Rodix controller only.
Unit of Measure

Rodix P/N

 N/A 121-500-0783

Model Number

 N/A CE-47 Plus

Brands

 N/A Rodix

Applications

 N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

 N/A 1 (Single)

AC Input Voltage

 N/A 120 VAC

Mains Frequency

 N/A 50/60 Hz

Output Voltage

 N/A 0 to 120 VAC

Current Rating

 N/A 15A

Enclosure Rating

 N/A None (Open Frame)

Product Certifications

 N/A CE Mark

Country of Origin

 N/A USA

Control Interface

 N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

 N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Auxiliary Output

 N/A Not Available

Remote Enable ON / OFF

 N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

 N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

 N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

 N/A Selectable: On or Off

Soft Start

 N/A Adjustable, 0-6 seconds

Spare Parts

 N/A , Switch for CE Mark Controls ($28.00)
, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00)
, Fuse, 15 Amp ($1.00)
, Triac, Power, 40A, for FC Series Controls ($15.00)
, Knob for Open Frame and General Purpose Controls ($3.00)
, Main control potentiometer used on Oil Resistant (OR) controls ($15.00)
, Control Board for CE Plus Controls in the 40+ Series, 120 VAC ($75.00)

Accessories

 N/A , Line Filter for CE Plus Series Controls ($45.00)