Print Back
The CE-108 Plus Feeder Cube® is a triple output vibratory feeder controller that carries the CE mark.
It is designed for use with vibratory feeder bowls, linear inline feeders, and bulk storage hoppers in combinations where seperate outputs are required for (3) seperate vibratorty feeders.
It is housed in a NEMA-12 oil resistant enclosure. Declaration of Incorporation provided.
Input voltage is 240 VAC, 50/60 Hz. Units A and B are boths fused for 8 amps, Unit C is fused for 1 amp. Input & Output Line Cords are sold seperately.
Unit of Measure

Specifications

Rodix P/N

N/A 121-500-0774

Model Number

N/A CE-108 Plus

Brands

N/A Rodix

Applications

N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

N/A 3 (Triple)

AC Input Voltage

N/A 240 VAC

Mains Frequency

N/A 50/60 Hz

Output Voltage

N/A 0 to 240 VAC

Current Rating

N/A Unit A - 8 A Unit B - 8 A Unit C - 1 A

Enclosure Rating

N/A NEMA-12

Product Certifications

N/A CE Mark

Country of Origin

N/A USA

Control Functions

Control Interface

N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Auxiliary Output

N/A Not Available

Remote Enable ON / OFF

N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

N/A Selectable: On or Off

Soft Start

N/A Adjustable, 0-6 seconds

Spare Parts

Spare Parts

N/A 104-000-0026, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00)
104-000-0080, Switch for CE Mark Controls ($28.00)
106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00)
106-000-0020, Fuse, 8 Amp ($1.00)
106-000-0030, Fuse, 1 Amp ($2.00)
115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00)
122-000-0010, Knob for CE Mark Controllers ($10.00)
123-000-0229, Main Control Potentiometer for CE Mark Controls ($18.00)
123-000-0294, Control Board for CE Plus Controls in the 40+ Series, 240 VAC ($90.00)
264-301, Terminal End Block for CE marked controls ($1.75)
264-321, Terminal Block for CE marked controls, 2 conductor ($1.75)
264-351, Terminal Block for CE marked controls, 4 conductor ($2.50)