Print Back
The FC-91-3H Plus Feeder Cube® is a triple heavy-duty controller with three parts sensing units housed in a NEMA-12 oil resistant enclosure. Input voltage is 120 VAC, 50/60 Hz. Units A and C are fused for 5 amps; Unit B is fused for 30 amps.
Unit of Measure

Specifications

Rodix P/N

N/A 121-000-8819

Model Number

N/A FC-91-3H Plus

Brands

N/A Rodix

Applications

N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

N/A 3 (Triple)

Part Sensing

N/A Triple Sensing

Package Type

N/A Oil Resistant

Enclosure Rating

N/A NEMA-12

AC Input Voltage

N/A 120 VAC

Mains Frequency

N/A 50/60 Hz

Current Rating

N/A Unit A - 5 A Unit B - 30 A Unit C - 5 A

Product Certifications

N/A None

Country of Origin

N/A USA

Control Functions

Control Interface

N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Vibration Sensing (Constant Feed Rate - CFR)

N/A Optional, CFR sensor P/N 123-000-0170 not included

Sensor Input (Optical, Proximity)

N/A PNP or NPN, 12 VDC

Auxiliary Output

N/A 12 VDC at 50 mA

Remote Enable ON / OFF

N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

N/A Selectable: On or Off

Time Delays ON / OFF

N/A Adjustable, 0-12 seconds

Soft Start

N/A Adjustable, 0-6 seconds

Accessories

Accessories

N/A 111-000-0031, Fiber Optic Cable, Glass, 36", straight ends ($70.00)
111-000-0051, Fiber Optic Cable, Plastic, 24", straight ends ($15.00)
111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00)
123-000-0098, Control Kit, 5 turn Potentiometer, with Knob ($54.00)
123-000-0135, Line Cord Install, High Current models, Single 120 VAC (1 input, 1 outputs) ($85.00)
123-000-0170, Accelerometer Kit for 90+ and 200 Series Controls ($90.00)
123-000-0227, Relay Output Kit, 12 VDC, for 90+ and 200 Series Controls ($25.00)

Spare Parts

Spare Parts

N/A 024-000-0490, Control Board for 90+ Series controllers, 120 VAC ($160.00)
104-000-0065, Toggle switch, 120 VAC High Current Controls ($47.00)
105-000-0028, Terminal strip, 7 position, 30 Amp ($10.00)
105-000-0033, Terminal marking strip, 7 position, 30 Amp ($5.00)
106-000-0036, Fuse, 30 Amp, 120V High Current FC series controllers ($18.00)
106-000-0042, Fuse holder for 120V High Current controls ($10.00)
112-000-0349, Toggle Switch Guard for High Current Controls ($10.00)
115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00)
122-000-0001, Knob for Oil Resistant Controls ($3.00)
123-000-0147, Main control potentiometer used on Oil Resistant (OR) controls ($15.00)