Print Back
The CE-99 Plus Feeder Cube® is a Dual controller, housed in a NEMA-12 oil resistant enclosure with parts sensing that carries the CE mark. Input voltage is 240 VAC, 50/60 Hz. Both Unit A and Unit B are fused for 8 amps. Declaration of Incorporation included.
Unit of Measure

Specifications

Rodix P/N

N/A 121-500-0772

Model Number

N/A CE-99 Plus

Brands

N/A Rodix

Applications

N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers

Number of Controls

N/A 2 (Dual)

Part Sensing

N/A Single Sensing

Package Type

N/A Oil Resistant

Enclosure Rating

N/A NEMA-12

AC Input Voltage

N/A 240 VAC

Mains Frequency

N/A 50/60 Hz

Output Voltage

N/A 0 to 240 VAC

Current Rating

N/A Unit A - 8 A Unit B - 8 A

Product Certifications

N/A CE Mark

Country of Origin

N/A USA

Control Functions

Control Interface

N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Vibration Sensing (Constant Feed Rate - CFR)

N/A Optional, CFR sensor P/N 123-000-0170 not included

Sensor Input (Optical, Proximity)

N/A PNP or NPN, 12 VDC

Auxiliary Output

N/A 12 VDC at 50 mA

Remote Enable ON / OFF

N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

N/A Selectable: On or Off

Time Delays ON / OFF

N/A Adjustable, 0-12 seconds

Soft Start

N/A Adjustable, 0-6 seconds

Accessories

Accessories

N/A 111-000-0031, Fiber Optic Cable, Glass, 36", straight ends ($70.00)
111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00)
120-000-0012, Line Filter for CE Plus Series Controls ($45.00)
123-000-0170, Accelerometer Kit for 90+ and 200 Series Controls ($90.00)
123-000-0227, Relay Output Kit, 12 VDC, for 90+ and 200 Series Controls ($25.00)

Spare Parts

Spare Parts

N/A 104-000-0026, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00)
104-000-0080, Switch for CE Mark Controls ($28.00)
106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00)
106-000-0020, Fuse, 8 Amp ($1.00)
106-000-0030, Fuse, 1 Amp ($2.00)
115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00)
122-000-0010, Knob for CE Mark Controllers ($10.00)
123-000-0147, Main control potentiometer used on Oil Resistant (OR) controls ($15.00)
123-000-0291, Control Board for CE Plus Controls in the 90+ Series, 240 VAC ($180.00)
123-000-0294, Control Board for CE Plus Controls in the 40+ Series, 240 VAC ($90.00)
264-301, Terminal End Block for CE marked controls ($1.75)
264-321, Terminal Block for CE marked controls, 2 conductor ($1.75)
264-351, Terminal Block for CE marked controls, 4 conductor ($2.50)