The FC-201-3H Feeder Cube® is a triple digital control based on the 90 Plus Series. It is housed in a NEMA-12 oil resistant enclosure. Input voltage is 120 VAC, 50/60 Hz. The output of Units A and C are fused for 5 amps; the output of Unit B is fused for 30 amps.
Unit of Measure
Rodix P/N |
N/A 121-000-2072 |
Model Number |
N/A FC-201-3H |
Brands |
N/A Rodix |
Applications |
N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers |
Number of Controls |
N/A 3 (Triple) |
AC Input Voltage |
N/A 120 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 120 VAC |
Current Rating |
N/A Unit A - 5A Unit B - 30A Unit C - 5A |
S/W Menu Languages |
N/A English, Spanish, French, German |
Optic Sensor Installed |
N/A Not installed |
Enclosure Rating |
N/A NEMA-12 |
High Current Model |
N/A Yes (3 or 4 coil Bowls) |
Product Certifications |
N/A UL/cUL Certified |
UL File Number |
N/A UL File E183233 |
Country of Origin |
N/A USA |
Control Interface |
N/A LCD Display. All parameters adjustable through software menu |
Output Pulse Modes |
N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps |
Vibration Sensing (Constant Feed Rate - CFR) |
N/A Optional, CFR sensor P/N 123-000-0170 not included |
Sensor Input (Optical, Proximity) |
N/A PNP or NPN, 12 VDC |
Auxiliary Output |
N/A 12 VDC at 50 mA |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable Max range: 0-60%. Adjustable Min range: 40-100% |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Time Delays ON / OFF |
N/A Adjustable, 0-25 seconds |
Soft Start |
N/A Adjustable, 0-10 seconds |
Spare Parts |
N/A
024-000-0200, Control Board for 200 Series controllers, 120 VAC ($160.00) 104-000-0025, Toggle Switch for Oil Resistant (OR) Controls ($8.00) 104-000-0026, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00) 104-000-0065, Toggle switch, 120 VAC High Current Controls ($47.00) 104-000-0078, Membrane Switch for 200 Series Controls ($30.00) 105-000-0028, Terminal strip, 7 position, 30 Amp ($10.00) 105-000-0029, Terminal strip, 7 position, 20 Amp ($6.00) 105-000-0030, Terminal marking strip, 7 position, 20 Amp ($3.00) 105-000-0033, Terminal marking strip, 7 position, 30 Amp ($5.00) 106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00) 106-000-0021, Fuse, 5 Amp ($1.00) 106-000-0036, Fuse, 30 Amp, 120V High Current FC series controllers ($18.00) 106-000-0042, Fuse holder for 120V High Current controls ($10.00) 112-000-0349, Toggle Switch Guard for High Current Controls ($10.00) 115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00) 123-000-0245, LCD Assembly for 200 Series Controls ($26.00) |
Accessories |
N/A
111-000-0031, Fiber Optic Cable, Glass, 36", straight ends ($70.00) 111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00) 123-000-0135, Line Cord Install, High Current models, Single 120 VAC (1 input, 1 outputs) ($85.00) 123-000-0170, Accelerometer Kit for 90+ and 200 Series Controls ($90.00) |
