The FC-201-DC Plus Feeder Cube® is a Single digital controller with a DC output designed for use with a motor. It is housed in a NEMA-12 oil resistant enclosure. Input voltage is 120 VAC, 50/60 Hz. Output voltage is 0-90 VDC or 0-130 VDC. Fused for 10 amps.
Unit of Measure
Rodix P/N |
N/A 121-000-2078 |
Model Number |
N/A FC-201-DC |
Brands |
N/A Rodix |
Applications |
N/A Brushed DC Motor for Conveyor or Step Feeder |
Number of Controls |
N/A 1 (Single) |
AC Input Voltage |
N/A 120 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 90 VDC0 to 130 VDC |
Current Rating |
N/A 10A |
S/W Menu Languages |
N/A English, Spanish, French, German |
Optic Sensor Installed |
N/A Not installed |
Enclosure Rating |
N/A NEMA-12 |
Product Certifications |
N/A UL/cUL Certified |
UL File Number |
N/A UL File E183233 |
Country of Origin |
N/A USA |
Control Interface |
N/A LCD Display. All parameters adjustable through software menu |
Vibration Sensing (Constant Feed Rate - CFR) |
N/A Optional, CFR sensor P/N 123-000-0170 not included |
Sensor Input (Optical, Proximity) |
N/A PNP or NPN, 12 VDC |
Auxiliary Output |
N/A 12 VDC at 50 mA |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable Max range: 0-60%. Adjustable Min range: 40-100% |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Time Delays ON / OFF |
N/A Adjustable, 0-25 seconds |
Soft Start |
N/A Adjustable, 0-10 seconds |
Spare Parts |
N/A
024-000-0200, Control Board for 200 Series controllers, 120 VAC ($160.00) 104-000-0025, Toggle Switch for Oil Resistant (OR) Controls ($8.00) 104-000-0026, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00) 104-000-0078, Membrane Switch for 200 Series Controls ($30.00) 105-000-0029, Terminal strip, 7 position, 20 Amp ($6.00) 105-000-0030, Terminal marking strip, 7 position, 20 Amp ($3.00) 106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00) 106-000-0019, Fuse, 10 Amp ($1.00) 115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00) 115-000-0053, Bridge Rectifier for DC Output Controllers ($10.00) 123-000-0245, LCD Assembly for 200 Series Controls ($26.00) |
Accessories |
N/A
111-000-0031, Fiber Optic Cable, Glass, 36", straight ends ($70.00) 111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00) 123-000-0021, Line Cord Installation, Single 120 VAC (1 input, 1 output) ($40.00) 123-000-0023, Line Cord Kit, 120 VAC (1 Male, 1 Female, cord grips) ($35.00) 123-000-0031, Access Hole, 7/8" diameter ($8.00) 123-000-0045, Line Cord Install, Single 120 VAC (1 input) ($25.00) 123-000-0091, Access Hole and Cord Grip, 7/8" diameter ($16.00) 123-000-0170, Accelerometer Kit for 90+ and 200 Series Controls ($90.00) |
