The FC-207-DC Feeder Cube® was designed for installing the controller into the door or panel face of a larger enclosure. Along with the FC-207-DC motor controller is a closed cell gasket around the plate, mounting hardware, and cutout dimensions for fitting the controller into your panel or door. The face plate is powder coated steel with SS threaded fasteners for a high degree of environmental protection (Nema-4). Input voltage is 120 VAC and the unit is fused for 8 amps. Output type is DC for Brushed DC conveyors/motors.
Unit of Measure
Rodix P/N |
N/A 121-000-2146 |
Model Number |
N/A FC-207-DC |
Brands |
N/A Rodix |
Applications |
N/A Brushed DC Motor for Conveyor or Step Feeder |
Number of Controls |
N/A 1 (Single) |
AC Input Voltage |
N/A 120 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 90 VDC0 to 130 VDC |
Current Rating |
N/A 8A |
S/W Menu Languages |
N/A English, Spanish, French, German |
Optic Sensor Installed |
N/A Not installed |
Enclosure Rating |
N/A NEMA-4 |
Product Certifications |
N/A UL/cUL Certified |
UL File Number |
N/A UL File E183233 |
Country of Origin |
N/A USA |
Control Interface |
N/A LCD Display. All parameters adjustable through software menu |
Vibration Sensing (Constant Feed Rate - CFR) |
N/A Optional, CFR sensor P/N 123-000-0170 not included |
Sensor Input (Optical, Proximity) |
N/A PNP or NPN, 12 VDC |
Auxiliary Output |
N/A 12 VDC at 50 mA |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable Max range: 0-60%. Adjustable Min range: 40-100% |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Time Delays ON / OFF |
N/A Adjustable, 0-25 seconds |
Soft Start |
N/A Adjustable, 0-10 seconds |
Accessories |
N/A
111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00) 123-000-0227, Relay Output Kit, 12 VDC, for 90+ and 200 Series Controls ($25.00) |
