The FC-91H-5 Plus Feeder Cube® is a Single heavy-duty controller with parts sensing housed in a NEMA-12 oil resistant enclosure with 111-500 optic sensor installed, (2) 111-31 fiber optic cables and incoming and outgoing power cords (plugs not included). Input voltage is 120 VAC, 50/60 Hz. Fused for 30 amps.
Unit of Measure
Rodix P/N |
N/A 121-000-8440 |
Model Number |
N/A FC-91H-5 Plus |
Brands |
N/A Rodix |
Applications |
N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers |
Number of Controls |
N/A 1 (Single) |
Part Sensing |
N/A 1 (Single) Sensing |
Package Type |
N/A Oil Resistant |
Enclosure Rating |
N/A NEMA-12 |
AC Input Voltage |
N/A 120 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 120 VAC |
Current Rating |
N/A 30A |
Product Certifications |
N/A UL/cUL Certified |
UL File Number |
N/A UL File E183233 |
Country of Origin |
N/A USA |
Control Interface |
N/A Analog: Potentiometer, DIP Switch |
Output Pulse Modes |
N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps |
Vibration Sensing (Constant Feed Rate - CFR) |
N/A Optional, CFR sensor P/N 123-000-0170 not included |
Sensor Input (Optical, Proximity) |
N/A PNP or NPN, 12 VDC |
Auxiliary Output |
N/A 12 VDC at 50 mA |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable via Trim Pot on Control Board |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Time Delays ON / OFF |
N/A Adjustable, 0-12 seconds |
Soft Start |
N/A Adjustable, 0-6 seconds |
Accessories |
N/A
123-000-0170, Accelerometer Kit for 90+ and 200 Series Controls ($90.00) 123-000-0227, Relay Output Kit, 12 VDC, for 90+ and 200 Series Controls ($25.00) |
Spare Parts |
N/A
024-000-0490, Control Board for 90+ Series controllers, 120 VAC ($160.00) 104-000-0065, Toggle switch, 120 VAC High Current Controls ($47.00) 105-000-0028, Terminal strip, 7 position, 30 Amp ($10.00) 105-000-0033, Terminal marking strip, 7 position, 30 Amp ($5.00) 106-000-0036, Fuse, 30 Amp, 120V High Current FC series controllers ($18.00) 106-000-0042, Fuse holder for 120V High Current controls ($10.00) 111-000-0031, Fiber Optic Cable, Glass, 36", straight ends ($70.00) 111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00) 112-000-0236, Mini Cord Grip for Rodix CFR and Banner sensors, hole size 0.5 (in), cable dia 0.114 to 0.250 (in) ($2.00) 112-000-0349, Toggle Switch Guard for High Current Controls ($10.00) 115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00) 122-000-0001, Knob for Oil Resistant Controls ($3.00) 123-000-0147, Main control potentiometer used on Oil Resistant (OR) controls ($15.00) |
