Request Information
The FC-94-DC Plus Feeder Cube® is a Single controller with a DC output designed for use with a motor. It can also be utilized in conjunction with sensors as it is within the FC-90 family. It is an open frame unit designed for mounting on a subpanel inside an enclosure. Input voltage is 120 VAC, 50/60 Hz. Output voltage is 0-90 VDC or 0-130 VDC. Fused for 8 amps. Does not include potentiometer or switch
Unit of Measure

Rodix P/N

 N/A 121-000-8833

Model Number

 N/A FC-94-DC Plus

Brands

 N/A Rodix

Applications

 N/A Brushed DC Motor for Conveyor or Step Feeder

Number of Controls

 N/A 1 (Single)

Part Sensing

 N/A 1 (Single) Sensing

Package Type

 N/A Open Frame

Enclosure Rating

 N/A None (Open Frame)

AC Input Voltage

 N/A 120 VAC

Mains Frequency

 N/A 50/60 Hz

Output Voltage

 N/A 0 to 90 VDC0 to 130 VDC

Current Rating

 N/A 8A

Product Certifications

 N/A UL/cUL Certified

Country of Origin

 N/A USA

Control Interface

 N/A Analog: Potentiometer, DIP Switch

Output Pulse Modes

 N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps

Vibration Sensing (Constant Feed Rate - CFR)

 N/A Optional, CFR sensor P/N 123-000-0170 not included

Sensor Input (Optical, Proximity)

 N/A PNP or NPN, 12 VDC

Auxiliary Output

 N/A 12 VDC at 50 mA

Remote Enable ON / OFF

 N/A optional via Low Voltage DC or Relay Contact

Remote Amplitude Control

 N/A Analog: 4-20 mA or 0-5 VDC

Minimum and Maximum Amplitude

 N/A Adjustable via Trim Pot on Control Board

Line Voltage Compensation (LVC)

 N/A Selectable: On or Off

Time Delays ON / OFF

 N/A Adjustable, 0-12 seconds

Soft Start

 N/A Adjustable, 0-6 seconds

Accessories

 N/A , Fiber Optic Cable, Glass, 36", straight ends ($70.00)
, Banner Minibeam Fiber Optic Sensor ($158.00)
, Relay Output Kit, 12 VDC, for 90+ and 200 Series Controls ($25.00)