The CE-91-2 Plus Feeder Cube® is a Dual controller with two parts sensing units, housed in a NEMA-12 oil resistant enclosure. The controller carries the CE mark. Input voltage is 120 VAC, 50/60 Hz. Unit A is fused for 15 amps and Unit B is fused 5 amps. Declaration of Incorporation provided.
Unit of Measure
Rodix P/N |
N/A 121-500-0756 |
Model Number |
N/A CE-91-2 Plus |
Brands |
N/A Rodix |
Applications |
N/A Vibratory Feeder Bowls, Inline Feeders, and Storage Hoppers |
Number of Controls |
N/A 2 (Dual) |
Part Sensing |
N/A Dual Sensing |
Package Type |
N/A Oil Resistant |
Enclosure Rating |
N/A NEMA-12 |
AC Input Voltage |
N/A 120 VAC |
Mains Frequency |
N/A 50/60 Hz |
Output Voltage |
N/A 0 to 120 VAC |
Current Rating |
N/A Unit A - 15 A Unit B - 5 A |
Product Certifications |
N/A CE Mark |
Country of Origin |
N/A USA |
Control Interface |
N/A Analog: Potentiometer, DIP Switch |
Output Pulse Modes |
N/A 50 Hz Mains: 100, 50, 50 reverse, 33, or 25 pps 60 Hz Mains: 120, 60, 60 reverse, 40, or 30 pps |
Vibration Sensing (Constant Feed Rate - CFR) |
N/A Optional, CFR sensor P/N 123-000-0170 not included |
Sensor Input (Optical, Proximity) |
N/A PNP or NPN, 12 VDC |
Auxiliary Output |
N/A 12 VDC at 50 mA |
Remote Enable ON / OFF |
N/A optional via Low Voltage DC or Relay Contact |
Remote Amplitude Control |
N/A Analog: 4-20 mA or 0-5 VDC |
Minimum and Maximum Amplitude |
N/A Adjustable via Trim Pot on Control Board |
Line Voltage Compensation (LVC) |
N/A Selectable: On or Off |
Time Delays ON / OFF |
N/A Adjustable, 0-12 seconds |
Soft Start |
N/A Adjustable, 0-6 seconds |
Accessories |
N/A
111-000-0031, Fiber Optic Cable, Glass, 36", straight ends ($70.00) 111-000-0500, Banner Minibeam Fiber Optic Sensor ($158.00) 120-000-0012, Line Filter for CE Plus Series Controls ($45.00) 123-000-0170, Accelerometer Kit for 90+ and 200 Series Controls ($90.00) 123-000-0227, Relay Output Kit, 12 VDC, for 90+ and 200 Series Controls ($25.00) |
Spare Parts |
N/A
104-000-0026, Toggle Switch Boot for Oil Resistant (OR) Controls ($2.00) 104-000-0080, Switch for CE Mark Controls ($28.00) 105-000-0090, Terminal Block for CE Mark controls ($1.50) 106-000-0017, Fuse Holder, Open Frame and Oil Resistant Controls ($4.00) 106-000-0018, Fuse, 15 Amp ($1.00) 106-000-0021, Fuse, 5 Amp ($1.00) 106-000-0067, Fuse, 0.062 A, for CE marked controls ($3.00) 115-000-0032, Triac, Power, 40A, for FC Series Controls ($15.00) 122-000-0010, Knob for CE Mark Controllers ($10.00) 123-000-0147, Main control potentiometer used on Oil Resistant (OR) controls ($15.00) 123-000-0290, Control Board for CE Plus Controls in the 90+ Series, 120 VAC ($160.00) 264-301, Terminal End Block for CE marked controls ($1.75) 264-321, Terminal Block for CE marked controls, 2 conductor ($1.75) 264-351, Terminal Block for CE marked controls, 4 conductor ($2.50) |
